Did you check that the HTTP server is switched on??
Did you check that the HTTP server is switched on??
Whatever
What firmware are you having on machine at the moment and what were you loading on?
Is the PSWC set to ON? (Admin>Network>PSWC)
Is or WAS the machine set by any chance to Management Function Choice other than Default? i.e. Vendor mode / Key counter etc..
If it was, some features may work prints/scan despite being disabled in Service Mode as it keeps the previous settings as default. Have a look at the Billing section under Enhanced security in Service Mode.
Whats the HEX reading on SSW63? (Service>System 2>Software Switch Setting)
Firmwares HERE.OK Google! ... will I need Berrocca this morning?
Hello thank you for all of your suggestions i found out it was the memory card i swapped with another machine test and now i have browser so thank you again
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
UK-211 or the like. the 2 gig ram that enables browser and other functions.
LOL, ya know we could have solved this on the first page if you specified using the "web browser" feature on the copier.
we all took it as you cannot log on to the copiers web page from a computer.
just for future clarification
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
right but the UK-211 ram should not stop you from opening the copiers webpage.
glad you got it sorted though
Bookmarks