Still waiting on that part. Supposedly went out today and will be here in 2 days.
In the meantime I have that 223 jamming from tray 3. All other trays work, including bypass. So I changed the entire feed unit and motors from a working machine. That eliminates all rollers and clutches, PS36, PS28 (because tray 1 works), M31, M32, and PS1 (because tray 4 works). What next?
0206181215a.jpg
Jam code?
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
The PRCB did not fix 283 issue.
Manual mentions unable to produce DC5v in FN and MFP unable to detect FN. I know we checked the 24V to FN.
Are there entire units I can swap to test? I have working 283's I can use to swap parts.
Here's the 223 jam code: I searched manual for 2021 and eliminated M31, M32 and PS36 by swapping the motors and entire tray 3 pickup/feed unit from a working 283.
If PS28 was the problem tray 2 would not work right?
If PS1 was the problem tray 1 wouldn't work right?
20180306_124537.jpg
Last edited by copierknob; 03-06-2018 at 10:24 PM.
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks