Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 31
C353, FS-519
I have this C353 that jam just outside the finisher.(FS-519)
Itīs jam because the paddle that is in the holder dont turn around to the home position and stop the paper to come out, this happen only when i use the stapler.
I have change the paddles (2) and the holder, I have clean the sensor, the clutch that drive the holder and no use.
When I enter the service mode and try the movement the paddle turn around just fine.
Can anyabody help me this issue.
Imsdal
-
Junior Member
- Rep Power
- 0
Re: C353, FS-519
Check one way gears that drive paper out . Recommend replacing them. Paper jams before exiting and will curl inside.
Tom
-
Senior Tech
100+ Posts
- Rep Power
- 31
Re: C353, FS-519
Hello.
The problem was that solenoid that activate the paddle.
It was some glue on it so i removed it and put some tejp on it and now it works.
Thanks for all the help
Imsdal
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks