yes, please send me the software, thanks
yes, please send me the software, thanks
Synthohol sent me fiery software and now i can print more than 1 file with new fiery system, but now i have a "new" problem... b/w copies or printings are ok... but color copies or color printings from PC, with or without fiery unit attached, (controller 1,0) prints like attached picture.... hole sheet replenished with cyan toner with a distort pattern... i replaced one more time soDIMM and DIMM memmory modules, cleaned IDC sensors... and test with another IU...
any ideas to solve it?
c352 distort1.jpgc352 distort2.jpg
Eww..
do copies do the same?
reseat all connections for fiery and VI board?
all copies do the same... even if i detach ic-406 controller...
distortion patterns should be a ram issue but not really cause i replaced all modules again...
Bookmarks