Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Good morning everyone
I am interested if there is anyone who can help me with a problem that appeared on a Bizhub C360. I replaced all the color cylinders (cmy) with the black cylinders original because they are cheaper of course changing the chips on each color. It's ok but a C2554 error appeared on the magenta color developer. I also replace the chip on the magenta development unit but for nothing, the error persists. The tcr value for all development modules is about 6 - 7 percent. When c2554 appears this value is 11-12 percent
I mention that I use original toners. Does anyone know how to store the TCR (toner density in the developer) value on this device or how this setting can be made ? I also replaced the magenta development module with one that has expired in terms of number of prints (115,000) with a new chip, the result being all error c2554. Thx
Last edited by cristachecri; 01-23-2020 at 09:42 AM.
cristachecri-
C2554 = high M tcr level.
You have over 115k on it. These series color units dont get dv from the toner like the newer ones. A chip alone wont fix that. Even if you ran full 255 M halftones and lean it down to about 7% and re-chip it I wouldn't trust that old dv. You need to replace the dv and chip. I would do all 3 color dv's.
Bookmarks