c6500 drum blade flipping

[bowser]

random instead of using just the springs from the c500/8050 use the springs from old drum and order the c500 cleaning bladeas well you will see the blade is much longer and will glide better.
this also solves the toner build up on the drums (a little more mony ess problems).

[bowser]

	Quote:			Originally Posted by bowser Some success with stretching the original (gold) c6500 springs or fitting c500 springs(better bet).Know of one that flipped with c500 springs. I swopped c500 blade and springs and fitted it to c6500 drum, great success. .
	this works have done ti many times now(a little more mony ess problems).

hear this problem is solved on the 6501

[laserman06]

Just heard today from KM rep. I posted what I found out on the thread listed below


See this thread http://www.copytechnet.com/forums/ko...lade-drum.html

[AQBJ8]

	Quote:			Originally Posted by random
	Anyone have this? Have a fix?

Change a new one!the blade so bad!

请换新的刀片 换了之后再加安装粉

也许是那刀片太差了

￥ぇォΘ

[VIJN]

re c6500 drum blade flip, i have fitted the application roller and pads from a 8050 drum unit to my c6500 drum units have gone from flips every 8k to life of over 200k on my last 16 drum units.

[BCR8TIVE]

I've "adjusted" the springs on the blades, over coated the blades, and angle cut the blades. That seems to work

[Si@danwood]

Fit a du102C !!!!Problem fixed, finito, no more, sorted, end of probs!!!!
Si

[StormyKnight]

Use 102C part number A0400Y4
Latest firmware permits increase toner being applied to the transfer belt, thus also lubricating the drums) irrelavent to the coverage. Before if the total coverage was over 40% no lubrication stripes where made, so if BK for example was over 40% coverage, none of the colours would get any lubrication. This was especially evident on larger runs.

[Keystone2]

	Quote:			Originally Posted by random
	Anyone have this? Have a fix?

What are the symptoms of a flipped blade? Our C500 is toning cyan across the top & bottom 17" edges & wonder if its a flipped blade? Thanks,

[StormyKnight]

Usually you get a drum rotation error with the related drum as the blade jams inself against the drum. If not an error, then the related drum colour will be very badly smeared across the whole page as the drum would be unable to clean itself between copies....