hi guys, does anyone have a parts manual for the FS534 finisher. I have the 654e manual but it doesn't include accessories.
hi guys, does anyone have a parts manual for the FS534 finisher. I have the 654e manual but it doesn't include accessories.
you will get a better response if posted in the correct forum:
http://www.copytechnet.com/forums/se...nual-requests/
What part numbers do you need? I brought in the external HDD this evening. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
there is an entrance guide plate which is 2 pieces. the finisher came from a wholesaler and doesn't have the correct guide to allow paper from a 654e to go in properly.
I think this is what you want:
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
No it's the 2 piece metal entrance guide on the finisher itself
I was wrong, it's not metal. plastic, pn A3EPPP3E01. FS527 was metal.
Thanks for all the input.
Bookmarks