Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21
  1. #11
    Master Of The Obvious 10,000+ Posts
    bizhub 1250  cannot pull out process unit

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,468
    Rep Power
    463

    Re: bizhub 1250 cannot pull out process unit

    How did I miss that?!

    Yes, just put the handle back on the shaft and unscrew the handle ASSEMBLY from the drum shaft.
    I never thought of doing it that way. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  2. #12
    Field Supervisor 500+ Posts
    Join Date
    Jun 2010
    Location
    folsom
    Posts
    519
    Rep Power
    34

    Re: bizhub 1250 cannot pull out process unit

    Quote Originally Posted by allan View Post
    How did that drum knob come off?
    Attachment 39117
    Some of those bits are on the picture?
    There were two screws holding the knob on and there was a sleeve that the knob fit over. That was ir

  3. #13
    Field Supervisor 500+ Posts
    Join Date
    Jun 2010
    Location
    folsom
    Posts
    519
    Rep Power
    34

    Re: bizhub 1250 cannot pull out process unit

    Quote Originally Posted by blackcat4866 View Post
    How did I miss that?!

    Yes, just put the handle back on the shaft and unscrew the handle ASSEMBLY from the drum shaft.
    I never thought of doing it that way. =^..^=
    So, the drum shaft unscrews?

  4. #14
    Field Supervisor 500+ Posts
    Join Date
    Jun 2010
    Location
    folsom
    Posts
    519
    Rep Power
    34

    Re: bizhub 1250 cannot pull out process unit

    Quote Originally Posted by allan View Post
    How did that drum knob come off?
    Attachment 39117
    Some of those bits are on the picture?
    Is that a 1250 manual. Wow that's awesome guy

  5. #15
    Master Of The Obvious 10,000+ Posts
    bizhub 1250  cannot pull out process unit

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,468
    Rep Power
    463

    Re: bizhub 1250 cannot pull out process unit

    Just the last 50mm to the front. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  6. #16
    Field Supervisor 500+ Posts
    Join Date
    Jun 2010
    Location
    folsom
    Posts
    519
    Rep Power
    34

    Re: bizhub 1250 cannot pull out process unit

    Quote Originally Posted by blackcat4866 View Post
    Just the last 50mm to the front. =^..^=
    Not sure what that means? 50mm

  7. #17
    Master Of The Obvious 10,000+ Posts
    bizhub 1250  cannot pull out process unit

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,468
    Rep Power
    463

    Re: bizhub 1250 cannot pull out process unit

    millimeters
    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  8. #18
    Field Supervisor 500+ Posts
    Join Date
    Jun 2010
    Location
    folsom
    Posts
    519
    Rep Power
    34

    Re: bizhub 1250 cannot pull out process unit

    Quote Originally Posted by blackcat4866 View Post
    millimeters
    =^..^=
    Lol, I know what mm is but the measurement of what I dont understand.

  9. #19
    Certified Konica Expert 2,500+ Posts
    bizhub 1250  cannot pull out process unit

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,981
    Rep Power
    217

    Re: bizhub 1250 cannot pull out process unit

    parts 2 3 and 4 are to remain as one piece, simply sharply turn the handle counter clockwise and it will unscrew from the drum shaft

  10. #20
    Field Supervisor 500+ Posts
    Join Date
    Jun 2010
    Location
    folsom
    Posts
    519
    Rep Power
    34

    Re: bizhub 1250 cannot pull out process unit

    Quote Originally Posted by Synthohol View Post
    parts 2 3 and 4 are to remain as one piece, simply sharply turn the handle counter clockwise and it will unscrew from the drum shaft
    Perfect, that's exactly what I needed! Thanks I appreciate ever ones input, Thanks all

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here