C454 and C454e firmware

[tsbservice]

You want to print from Android device, right?
AirPrint is for Mac, iPhone, iPad, or iPod.
Install latest Konica Minolta Mobile Print app from Google Play and try again.

[joelea]

Well according to this MOBILEPRINT Brochure they do.

http://www.copytechnet.com/forums/re...53ad41-m0NOmAg

they dont, moral of the story is don’t always believe what you see in the brochure

[srvctec]

Well according to this MOBILEPRINT Brochure they do.

http://www.copytechnet.com/forums/re...53ad41-m0NOmAg

Well in that brochure there is an asterisk next to "Compatible Konica Minolta Engines*" and at the bottom it says: "* Supported Konica Minolta mobile print functions may vary based on engine ". I would take that to mean that AirPrint doesn't necessarily work with all listed engines.

[copier tech]

I found something about the switches here:

http://www.copytechnet.com/forums/ko...tml#post479452

changed switch 25 from HEX20 to HEX​50 <- change function ver.
switch 168 from HEX06 back to HEX00 <- toggle airprint on and of.


Could this be valid for C454 that i have?

Unfortunately AirPrint is not supported on the non 'e' series even with the 'special' version up firmware.

Version Up Firmware Technical Information Rev4.pdf

[benli21]

Synthohol,
Any chance you can get me versions GB0-A9 and GB2-K5?
it is to fix a specific scan error.

Notes:
1. NON-4e "Version Up firmware for MIF devices" is required to support SHA2. (bizhub C224/C284/C364/C454/C554/C654/C754)
You can use any of the following Special Firmware:

• bizhub C224, C284, C364, C454, C554 Special Firmware Version GB0-K9 Support of SHA-256 (Version Up firmware for MIF devices)
• bizhub C654, C754 Special Firmware Version GB0-K9 Support of SHA-256 (Version Up firmware for MIF devices)
• bizhub C224, C284, C364, C454, C554 Special Firmware Version GB6-K9 Support of SHA-256 (Version Up firmware for MIF devices)
• bizhub C654, C754 Special Firmware Version GB6-K9 Support of SHA-256 (Version Up firmware for MIF devices)
• bizhub C224, C284, C364, C454, C554 Special Firmware Version GB5-K6 Support of SHA-256 (Version Up firmware for MIF devices)
• bizhub C654, C754 Special Firmware Version GB5-K6 Support of SHA-256 (Version Up firmware for MIF devices)

2. Special Instructions on how to install these firmwares are provided in attached "Version Up firmware for MIF devices" document.
3. Please follow the attached procedures in setting up scan to Email using Microsoft® Office 365™.

I just got a C454, and realise the machine is running on a very old firmware version 1. I would like to update that to enable Samba server and Airprint. I am really struggling to get the latest firmware of the printer and instruction about how to install the firmware. can you please help me to get the firmware for me?

[Synthohol]

please see below

[MasterT]

I just got a C454, and realise the machine is running on a very old firmware version 1. I would like to update that to enable Samba server and Airprint. I am really struggling to get the latest firmware of the printer and instruction about how to install the firmware. can you please help me to get the firmware for me?

I'll send you the firmware i have on Monday.

Actually a few days back I tried to resurrect the printing from android problem.

I installed the latest Konica Minolta Mobile Print from Google Play and surprise, It now prints and scans OK.

So after all the C454 firmware i got about a year ago had the necessary support in it but it most probably needed a Mobile Print update to work with it.

[copier tech]

I just got a C454, and realise the machine is running on a very old firmware version 1. I would like to update that to enable Samba server and Airprint. I am really struggling to get the latest firmware of the printer and instruction about how to install the firmware. can you please help me to get the firmware for me?

The C454 'non e' model does not support AirPrint even with the version up firmware.

Version Up Firmware Technical Information Rev4.pdf

[benli21]

The C454 'non e' model does not support AirPrint even with the version up firmware.

Version Up Firmware Technical Information Rev4.pdf

What about Samba server, the old one only have the Samba client. I really need the Samba server

[Rewind!]

Samba in relation to Unix/Linux, or support for older Mac's?

thanks!

JC