Thanks: 
Likes: 
Dislikes: We have a C284e that when switched on begins warming up screen starts up then after 30 seconds switches off then restarts and so on tried firmware no go .
We have a C284e that when switched on begins warming up screen starts up then after 30 seconds switches off then restarts and so on tried firmware no go .
likely bad SSD board.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
thank you it bwas the ssd board, I don t suppose you know the part no for it.It s not listed on our KM parts list.
Hi,
It was something Konica exchanged for you by sending the old one back. Then it was new firmware that seemed to cure the problems.
Regards
Konica did issue a bulletin and a part number for the SSD
i will see if i can find it
I Used To Live To Fix Things Now i Fix Things To Live
SSD boards are not orderable part there is a special program through Konica website to order it you have to be an active dealer in order to get it through normal channels
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Originally Posted by Elmo
This is the p/n a cheap item to order.
9960P00H02D14P - SSD
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Are you sure ??? Is a MDS-assy
100% thats the part number i’ve been using, took it off the box!
Google that number to confirm.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Thanks , Do you know the reference for 8series SSD ?
Reply With Quote
Bookmarks