Hi everybody
here is the samples of my copying problem
Sample 1.jpgsample 2.jpg
Hi everybody
here is the samples of my copying problem
Sample 1.jpgsample 2.jpg
A little more information would help. Does this happen when printing or just copying? What do internal test pages look like? What have you done so far?
First thing that comes to mind is the printhead / laser unit is bad. If only when copying look at the CCD unit, loose connectors, etc.
thanks for your interest
Here is my history, I have formatted my hard drive and I've got the message of no animation guide data available so I have downlaoded the movie data from the internet but when trying to fixe it in the machine I've got the message cd390, then I've rebboted the machine but it appeared that it has resetted all data, and among problems the imaging unit problem. for more information the printing is very good but the copying is bad.
thanks
those are the lines of shame.
perform the initial setup step by step as if machine was brand new and the lines will go away.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Excuse me could you tell me how to do this because I'm not perfect in this since I'm not a technician but with yours help I can manage to resolve it.
thank you again
The reason you have this fault is because you are not a tech
best advice is to get a qualified tech to fix your machine
messing around with it yourself can cause more problems than you fix
I Used To Live To Fix Things Now i Fix Things To Live
Excuse me for my interference
The Technician I have called couldn't resolve this problem
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Not only I payed them but they ask me for more
I Used To Live To Fix Things Now i Fix Things To Live
Bookmarks