biz 501

[Gab]

I want to replace opc drum . I need to get in service mode and clear drum counter as service manual says.
I select utility/counter, meter count, stop 0,0, stop, 01 and machine asks for CE password to be set.
I insert 0000000 or 12345678 but wrong code number .
I took over service for this machine from others . Before me others provioded service. Also it's a second hand machine.
When i give 12345678 or 900000000 i can get in administrator mode .
Previous service say's that's all he knows.
Any idea how to get in service mode?

[Toxic]

Did you try 92729272 ?

[copyman]

Your post wasn't clear, are you putting in "8" zeros? Once you get into service mode you can go into enhanced mode and change password or turn off.

[Gab]

Your post wasn't clear, are you putting in "8" zeros? Once you get into service mode you can go into enhanced mode and change password or turn off.

I am trying to get in service mode but it asks for code i tried 8 zeros also 12345678 but machine says wrong code.
If the right code is lost do i have to replace ram?

I just refer when i try to reach administration and asks for code i write 8 zeros or 12345678 (i don't remember which one of these two" ) and now it is accepted.

[copyman]

Not sure if this will work but after "stop 0 0 stop 0 1" try "stop" "0" "clear" and see if you can get into enhanced mode. If it works you can change or turn off the "CE" password.

If nothing works you will have to change NVRAM.

[Gab]

Not sure if this will work but after "stop 0 0 stop 0 1" try "stop" "0" "clear" and see if you can get into enhanced mode. If it works you can change or turn off the "CE" password.

If nothing works you will have to change NVRAM.

Is there the ability to cancel or change CE password when i can get in Administrator ?
giving 8 zeroes i get in administrator menu. Can i clean CE password there?

[copyman]

No you can't change in Admin mode. You need to get into the enhanced security mode

[Gab]

No you can't change in Admin mode. You need to get into the enhanced security mode

I think enhanced mode is in admin mode.
If i get in enhanced mode whice must i select to cancel ce password.

[darry1322]

I think enhanced mode is in admin mode.
If i get in enhanced mode whice must i select to cancel ce password.

You can't reset CE password in Admin mode. Enhanced security or no. Did you try 92729272 as earlier suggested?

[Gab]

You can't reset CE password in Admin mode. Enhanced security or no. Did you try 92729272 as earlier suggested?

?Yea i have tried 92729272 with no result.