Thanks:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 21
Bizhub c6500 Icp4 on adu board keeps burning
Hello
I have a problem with an c6500.
Like 2 times a week it starts to paper jam any paper printed on duplex and everythime its the same problem. The cable from The duplex motor is out. If the cable is not out then the icp 4 on adu board is burned.
Already changed that motor and the board.
Any idea what else can be done?
Thanks
Last edited by mircea; 06-06-2018 at 09:39 AM.
-
Re: Bizhub c6500 Icp4 on adu board keeps burning
Maybe to check wires from pcb to motor for damaged insulation and get shorted to ground of machine...
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks