Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Technician
    Join Date
    Dec 2015
    Location
    Lancashire
    Posts
    39
    Rep Power
    0

    C6000L tray 2 lift

    Morning Folks,

    Hope your all good.

    Something that has been baffling my brain. We have an issue with tray 2 not lifting. Everything points to the tray lift motor. Except... its not the motor. We have changed the lift motor.

    All I can think of is the very unlikely possibility that the frame has been bent by my customer slamming in the drawer? I am however clutching at very small straws!

    Anyone have any ideas?

  2. #2
    Master Of The Obvious 10,000+ Posts
    C6000L tray 2 lift

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: C6000L tray 2 lift

    Machine trays or PF unit?

    There's a linkage that drives the tray upward ... if that linkage breaks the machine will try lifting for 5 seconds, then reverses and gives up. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Technician
    Join Date
    Dec 2015
    Location
    Lancashire
    Posts
    39
    Rep Power
    0

    Re: C6000L tray 2 lift

    Sorry Blackcat, been manic!

    Its the machine trays. All the linkages look ok.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here