Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Technician
    Bizhub 4 non e series Control panel


    Join Date
    Jun 2010
    Posts
    43
    Rep Power
    29

    Bizhub 4 non e series Control panel

    Hello all,

    I have a Bizhub C224 non e that throw a code C-D411 and I found where the problem is. It is the ribbon cable that connect the control panel PCB to the keypad and sub power part. Please see the attach pictures. I know I have to replace the Control Panel but it is quite expensive for the worth of the machine. Just wonder any of you run into this before. Were you able to locate and replace the ribbon cable? And would a 4e panel work with the firmware that update the 4 to 4e? Thank you all!

    delboy
    Attached Images Attached Images

  2. #2
    Service Manager 1,000+ Posts
    Join Date
    Sep 2008
    Location
    Flat Rock Michigan
    Posts
    1,046
    Rep Power
    49

    Re: Bizhub 4 non e series Control panel

    e panel will work , no hard keypad though.

  3. #3
    Technician
    Bizhub 4 non e series Control panel


    Join Date
    Jun 2010
    Posts
    43
    Rep Power
    29

    Re: Bizhub 4 non e series Control panel

    Quote Originally Posted by Albonline View Post
    e panel will work , no hard keypad though.
    Hello and thanks for replying. Would you able to share how you get it to work? I was in contact with Hytec Dealer Services to inquire about the repair of the panel. I talked to one of the tech and he told me 4e panel may work on 4 and he would try to see if it works. He did try and told me it did not work for him. However, he did not know there is a firmware to convert the 4 to 4e. Did you have to update firmware first to get it to work? I do not have anything to try at the moment. Thank you!

    delboy

  4. #4
    Service Manager 5,000+ Posts
    Bizhub 4 non e series Control panel

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: Bizhub 4 non e series Control panel

    There is firmware to convert a non 'e 'to an 'e' however it only gives some of the 'e' functions, it doesn't actually "convert" the machine as such.
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  5. #5
    Field Supervisor 500+ Posts
    Bizhub 4 non e series Control panel


    Join Date
    Jun 2009
    Location
    oxford
    Posts
    690
    Rep Power
    37

    Re: Bizhub 4 non e series Control panel

    Quote Originally Posted by delboy10 View Post
    Hello all,

    I have a Bizhub C224 non e that throw a code C-D411 and I found where the problem is. It is the ribbon cable that connect the control panel PCB to the keypad and sub power part. Please see the attach pictures. I know I have to replace the Control Panel but it is quite expensive for the worth of the machine. Just wonder any of you run into this before. Were you able to locate and replace the ribbon cable? And would a 4e panel work with the firmware that update the 4 to 4e? Thank you all!

    delboy
    Hi, I have this exact issue.,.... did you manage to source a ribbon cable?

  6. #6
    Service Manager 1,000+ Posts
    Bizhub 4 non e series Control panel


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    1,894
    Rep Power
    69

    Re: Bizhub 4 non e series Control panel

    Did you test continuity on cable?



    Sent from my SM-G955F using Tapatalk

  7. #7
    Field Supervisor 500+ Posts
    Bizhub 4 non e series Control panel


    Join Date
    Jun 2009
    Location
    oxford
    Posts
    690
    Rep Power
    37

    Re: Bizhub 4 non e series Control panel

    Quote Originally Posted by rrrohan View Post
    Did you test continuity on cable?



    Sent from my SM-G955F using Tapatalk
    No because I wouldn’t be able to position it correctly where the possible fractures are in the tracks.

  8. #8
    Technician
    Bizhub 4 non e series Control panel


    Join Date
    Jun 2010
    Posts
    43
    Rep Power
    29

    Re: Bizhub 4 non e series Control panel

    Quote Originally Posted by jonbonse View Post
    Hi, I have this exact issue.,.... did you manage to source a ribbon cable?
    Hello,

    Unfortunately, I could not find the ribbon cable. Anyway, I don't know if it would help but I can confirm you can use the 4e control panel for the 4 series with updated firmware to emulate the 4 to 4e. You also need new cable to connect to the Main board (because of the length). The firmware would have to be done to use the on display number keys instead off the keypad.

    delboy

  9. #9
    Junior Member
    Join Date
    Jan 2018
    Posts
    7
    Rep Power
    0

    Re: Bizhub 4 non e series Control panel

    hi!
    The kit replace cable is a code

    9981000545 - NEW FCC KIT


    DisplayC224SostituzioneFlatCable.pdf



    good work!!



  10. #10
    Technician
    Bizhub 4 non e series Control panel


    Join Date
    Jun 2010
    Posts
    43
    Rep Power
    29

    Re: Bizhub 4 non e series Control panel

    Quote Originally Posted by SimoneCariz View Post
    hi!
    The kit replace cable is a code

    9981000545 - NEW FCC KIT


    DisplayC224SostituzioneFlatCable.pdf



    good work!!


    Thank you so much for the information! However, it is not available in North America Market!!!

    delboy
    Last edited by delboy10; 09-11-2018 at 04:38 PM.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here