scan to usb current settings

[Bix]

Hello, a question perhaps stupid.


In copying and scanning, I can set the default settings (ie the current settings).


But I have difficulty finding a similar option for scanning to usb. The customer would like to black by default and not the color scan.


Do you know how to set this up?

[Synthohol]

i dont think there is a setting for that. it takes literally 1 second to hit auto color and change to black.

[copier addict]

Set it to black then go into utility- user settings= scan/fax settings- default scan/fax settings- current settings- okay.

[Bix]

lol, I suffer from a short memory.


I have the same problem, trying to rediscover my old thread.


However I still haven't been able to find an option that allows me to set the default black and white in the scan to usb.
@copier addict your solution is correct but concerns the normal scan. Unfortunately this does not affect scan to usb.

[Bix]

I succeeded!


You insert the USB stick. At the top right there is "Check settings". Now a popup comes out. You press "Use current settings".

[srvctec]

Since it wasn't mentioned anywhere in this thread for some reason and is important.

This only applies to 7/8 series and later. The 4e series does not have this option.