Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Service Manager 1,000+ Posts
    Biz 223 quality issue


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    1,272
    Rep Power
    45

    Biz 223 quality issue

    My wife brought home these samples from work. Just started happening today. Black toner marks than blank streak down the whole page in NON-feed direction. I marked the lead edge. I know the fine black line is from fuser and in the direction of feed.

    Never saw this before so figured I would ask on here before going out to look at it tomorrow.

    Thanks for the help

    Attached Files Attached Files

  2. #2
    Master Of The Obvious 10,000+ Posts
    Biz 223 quality issue

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    16,553
    Rep Power
    272

    Re: Biz 223 quality issue

    Wow! That's nice!

    I'd say that it's probably dumping developer because the drum is arcing to the primary. Order drum unit with primary, and developer (along with your fuser). =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  3. #3
    Senior Tech 100+ Posts
    Join Date
    May 2016
    Posts
    165
    Rep Power
    8

    Re: Biz 223 quality issue

    Quote Originally Posted by copyman View Post
    My wife brought home these samples from work. Just started happening today. Black toner marks than blank streak down the whole page in NON-feed direction. I marked the lead edge. I know the fine black line is from fuser and in the direction of feed.

    Never saw this before so figured I would ask on here before going out to look at it tomorrow.

    Thanks for the help
    Take a look at magnet roller on developing unit.
    I would say one side has worn bearing or collar and is too close to the drum (spots), and the other is too far (white void).
    Check consumables life!,
    If you have in stock, bring with you new drum unit, developer, developing unit, fuser (or upper fuser roller).

    Problem solved


  4. #4
    Technician
    Join Date
    Jan 2013
    Posts
    17
    Rep Power
    12

    Re: Biz 223 quality issue

    You can get similar issues when replacing a drum without resetting the chip. Sometimes background data reset will resolve.


  5. #5
    Service Manager 1,000+ Posts
    Biz 223 quality issue


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    1,272
    Rep Power
    45

    Re: Biz 223 quality issue

    Hi, Thanks for all the replies. It turned out the drum was shorting because the Dev collar was worn. Replaced drum & developer unit and all good now.

    Who ever posted about the drum chip there in no drum chip on the Biz 223. Counter is cleared in service mode.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •