Bizhub C353 "Replenish Paper" Even Though there is paper

[Synthohol]

just for clarification, the actuator is on the feed assy not the tray.

[lazymangr]

IMG_3055.jpgIMG_3053.jpg here and here. thats the spot. there is a lever at the machine that detects it. i usually apply lubricant on the trays and problem solved.

[Pjud]

of note: I had this problem but it turns out, I had too much paper in tray and it would not accept with all the paper. I reduced the paper amount and voila...the error message is now gone...

[copier tech]

of note: I had this problem but it turns out, I had too much paper in tray and it would not accept with all the paper. I reduced the paper amount and voila...the error message is now gone...

Correct, this is why ALL copiers have a MAX paper limit label on the paper trays. Usually one ream of 80GSM.