Hi, I can't enter Service Mode by using the default "9272" x 4 times. I need to reset maintenance counter.
Hi, I can't enter Service Mode by using the default "9272" x 4 times. I need to reset maintenance counter.
Try going via reset procedure. Then stop 00 stop 01. then 9272 x4 times
did you try 9272 twice? someone obviously changed it.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
maybe someone set it to the older models password, try "12345678" or "00000000"
I always change my machines from "9272x4" to 9272x2"
sorry but I will write in English with google transistor because I'm not with the work colleague, I hope understands me. I think from experience that by calling KM they point me to the nearest service center and usually send a technician behind payment. They don't say technical informations.
Enter service mode from trouble reset mode this bypasses the password.
(hold down reset while powering on)
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks