I have stop life enabled on an 8 series machine but machine is showing replace cyan drum message. Anyone know fix or cause for this?
I have stop life enabled on an 8 series machine but machine is showing replace cyan drum message. Anyone know fix or cause for this?
Wait. So by default the machine is set to keep running even if life of parts has passed? I just assumed the opposite, crapola on a stick.
Edit: Apparently the 4e series is enabled by default and the 8 series is not.
So did the machine stop functioning?
There are two settings in the machine. One for the message and one for preventing the machine from shutting down at he end of life of the consumables. Apparently the replace message is still enabled. Check the setup guide and it will walk you through the steps. Part of which has the enable and disable message.
Bookmarks