Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
  1. #11
    Junior Member
    Join Date
    Aug 2018
    Location
    Perugia
    Posts
    7
    Rep Power
    0

    Re: BizHub C250 won't print, led data blinking

    Hello,

    I was not be able to upgrade the firmware, probably because I failed to find a compatible brand of CF Cards, tryed some different brand (kingstone, sandisk) in different sizes (128-256-512) without success.

    By the way I try to find out some evidence of faulty compenents.

    I notice that the memory usage is always 100% even if the machine is just powered on without any job launched.

    So I started playing in the Memory Check menu and I carried out some memory tests and I found that the Compression/Decompression check give the error C-4765

    All other memory tests seems to be good.

    Any suggests?

    Thank you


  2. #12
    Service Manager 1,000+ Posts
    BizHub C250 won't print, led data blinking


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    1,272
    Rep Power
    45

    Re: BizHub C250 won't print, led data blinking

    Memory is suppose to be at 100% and will drop lower when scanning, etc. In other words it's telling you machine has 100% of memory left to use.
    Still looking like you need NVRAM and/or MFP board replaced


  3. #13
    Junior Member
    Join Date
    Aug 2018
    Location
    Perugia
    Posts
    7
    Rep Power
    0

    Re: BizHub C250 won't print, led data blinking

    Quote Originally Posted by copyman View Post
    Memory is suppose to be at 100% and will drop lower when scanning, etc. In other words it's telling you machine has 100% of memory left to use.
    Still looking like you need NVRAM and/or MFP board replaced
    I read on other sites that there is an NVRAM recovery tool, where can I find it?

    Thank you


  4. #14
    Junior Member
    Join Date
    Aug 2018
    Location
    Perugia
    Posts
    7
    Rep Power
    0

    Re: BizHub C250 won't print, led data blinking

    PROBLEM SOLVED

    Since I was unable to update the firmware through the CF card I done it via ISW update.

    It is very simple, you just need to setting up an FTP Server on a PC connected to the same network of the printer (Filezilla works fine) and follow the procedure attached.

    After updating the firmware the machine started to print correctly over the network.

    Thank you for your support.

    Andrea

    Attached Files Attached Files

  5. #15
    Service Manager 1,000+ Posts
    BizHub C250 won't print, led data blinking


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    1,272
    Rep Power
    45

    Re: BizHub C250 won't print, led data blinking

    Good to hear it worked out. Keep in mind that model is 10+ yrs old and no longer supported by K/M.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •