Results 1 to 9 of 9
  1. #1
    Junior Member
    Join Date
    Apr 2009
    Location
    Lallmatie
    Posts
    7
    Rep Power
    0

    Bizhub 282 please wait

    Hello
    I have a bizhub 282, on powering on it displays PLEASE WAIT, and does not proceed any further. Onpowering on it makes some noise - normal turning of parts noise, fuser is heating.

    Any idea what can be the problem.

    Thanks

  2. #2
    Service Manager 1,000+ Posts
    Join Date
    Apr 2009
    Location
    LaPorte Indiana
    Posts
    1,025
    Rep Power
    32

    Re: Bizhub 282 please wait

    Check the toner bottle. It is probably empty.

  3. #3
    Junior Member
    Join Date
    Apr 2009
    Location
    Lallmatie
    Posts
    7
    Rep Power
    0

    Re: Bizhub 282 please wait

    I replaced with new toner, same result.

  4. #4
    Service Manager 2,500+ Posts
    Bizhub 282 please wait

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    4,329
    Rep Power
    70

    Re: Bizhub 282 please wait

    Quote Originally Posted by ecoworld View Post
    I replaced with new toner, same result.
    did you check to make sure no paper stuck somewhere?

    reflash ALL system firmware

  5. #5
    Field Supervisor 500+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    563
    Rep Power
    35

    Re: Bizhub 282 please wait

    On old Toshibas it will display "Please wait" message forever when HDD start to have bad sectors. Usually formatting will take care of that issue.
    I would try unset HDD in service mode and if it boots up formatting HDD will be next step.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

  6. #6
    Senior Tech 250+ Posts
    Join Date
    Mar 2017
    Posts
    254
    Rep Power
    12

    Re: Bizhub 282 please wait

    MFBS2 has failed, or scanner board has failed. Either way, you are gonna have a hard time finding a replacement, and the MFBS2 was manufactured for 2 different phases so you can't put a phase 1 board into a phase 2 MFP, but you can change a jumper on the phase 2 board to make it work in a phase one. You can remove the scanner board to see if it will come to ready as a test. Emujo

  7. #7
    Service Manager 1,000+ Posts
    Bizhub 282 please wait

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    1,943
    Rep Power
    39

    Re: Bizhub 282 please wait

    december 2017 that machine is discontinued with no support.
    time for an upgrade!!

  8. #8
    Service Manager 1,000+ Posts
    Bizhub 282 please wait

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    1,943
    Rep Power
    39

    Re: Bizhub 282 please wait

    can you get into service an see if there are any codes? check the atdc level and fuser temp too.
    maybe thermister is dirty.
    remove the IU and separate the drum from DV unit and check the brush on the roller and coverage.

  9. #9
    Service Manager 2,500+ Posts
    Bizhub 282 please wait

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    4,329
    Rep Power
    70

    Re: Bizhub 282 please wait

    Quote Originally Posted by Synthohol View Post
    december 2017 that machine is discontinued with no support.
    time for an upgrade!!
    agreed.... no support?
    might as well get the customer to upgrade!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •