Hello,
i need help pleas, i have a c451 konica minolta it s work well but when i make a phoyocopie ftom the scanner direct it print a small squares on the paper i tried many solutions but nothing works
Hello,
i need help pleas, i have a c451 konica minolta it s work well but when i make a phoyocopie ftom the scanner direct it print a small squares on the paper i tried many solutions but nothing works
Perhaps you'd like to attach a sample? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
You might wanna go through the installation instructions again. Sounds like that machine is back at factory settings or something.
The machine has lost it's setting and the initial set up must be done again. This should be done by a qualified technician.
Not helping you as I can see that you are not a qualified technician and you didn't take our suggestions.
why would you change the NVRAM?
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Bookmarks