Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 14
C3350 Light/Faded print all colors
All the Imaging units are within range and good on life transfer belt checks out good as well. I did and initialization and stabilization. Cleaned off the printheads receded all Imaging units and transfer belts unplugged unit from wall and power cycle. I had this problem before but it lingered on and I was not the one who fixed it in the end and don't remember what the fix was
-
Re: C3350 Light/Faded print all colors
A picture would be nice! But otherwise HV or drive unit.
-
Senior Tech
100+ Posts
- Rep Power
- 35
Re: C3350 Light/Faded print all colors
check all you contacts around transfer area. There was a bulletin about this. You need to reform one of the silver contacts. Even though the meters indicate life left not always the case.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks