Hallo
i buy today a used bizhub 283..only black,is posible too use black color toner from c8000 to refil my bizhub 283 ? I have in studio a new Acurio Print C2060L..is posible to refil bizhub with black toner from my C2060L ?
Thanks
Hallo
i buy today a used bizhub 283..only black,is posible too use black color toner from c8000 to refil my bizhub 283 ? I have in studio a new Acurio Print C2060L..is posible to refil bizhub with black toner from my C2060L ?
Thanks
Not even close to match that but you can try,i am curious about results...
Do it just do it.
Whatever
Yeah do it I dare you!
Post a print sample after for us to laugh at!
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
since we are on the subject, my car uses gas but the station around the corner sells diesel cheaper, thats the same right? i should have no problems substituting since fuel is fuel amiright? amiright?
oy vey...
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
And after you have tried that, why don't you put diesel in your petrol car or vice versa...
No really it could work....
The worst that can happen is a dev replacement.
Would be nice and shiny prints.
If it gets past the drum, the fuser temp should be dropped.
Whatever
I do not want to do experiments, I wonder if anyone has done this and if black toner is compatible at 6500 I reloaded toner from c8000 and I worked a few years with him without any problems.
Tx
It would be experimental. We don't have the time or energy to play with this.
That is why we would like to know the outcome to this.
What i do know it that B250, B282 toner will work ok.
Whatever
Bookmarks