Results 1 to 10 of 10
  1. #1
    Trusted Tech 50+ Posts
    Biz hub c 220 Copy issue


    Join Date
    Oct 2016
    Location
    colombo
    Posts
    73
    Rep Power
    0

    Biz hub c 220 Copy issue

    Hello

    I got couple of Biz hub c 220 machines with Copy issue (Printouts OK) .Please check attachment.



    Any help would be great.
    Thank you​
    Attached Images Attached Images

  2. #2
    Master Of The Obvious 10,000+ Posts
    Biz hub c 220 Copy issue

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    16,969
    Rep Power
    281

    Re: Biz hub c 220 Copy issue

    What have you done so far? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  3. #3
    Trusted Tech 50+ Posts
    Biz hub c 220 Copy issue


    Join Date
    Oct 2016
    Location
    colombo
    Posts
    73
    Rep Power
    0

    Re: Biz hub c 220 Copy issue

    Quote Originally Posted by blackcat4866 View Post
    What have you done so far? =^..^=
    Print out alignment OK copy had issue both ARDF and Flatbed , I didn't try anything .
    thank you for your reply

  4. #4
    Service Manager 1,000+ Posts
    Join Date
    Apr 2009
    Location
    LaPorte Indiana
    Posts
    1,016
    Rep Power
    32

    Re: Biz hub c 220 Copy issue

    When was the last time optics were cleaned and stabilization and calibration ran??

  5. #5
    Master Of The Obvious 10,000+ Posts
    Biz hub c 220 Copy issue

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    16,969
    Rep Power
    281

    Re: Biz hub c 220 Copy issue

    Quote Originally Posted by raveendrala View Post
    Print out alignment OK copy had issue both ARDF and Flatbed , I didn't try anything .
    thank you for your reply
    #2) demonstrate that you have made some attempt to fix it. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  6. #6
    Technician
    Join Date
    Jan 2013
    Posts
    18
    Rep Power
    13

    Re: Biz hub c 220 Copy issue

    Your issue is more than likely the scanner bed has dropped because there is no support at the front left corner. Get your hands underneath the scanner bed and lift it up. It might take a few attempts. I carefully use a car jack in the workshop to resolve this. Hope this helps

  7. #7
    Trusted Tech 50+ Posts
    Biz hub c 220 Copy issue


    Join Date
    Oct 2016
    Location
    colombo
    Posts
    73
    Rep Power
    0

    Re: Biz hub c 220 Copy issue

    Quote Originally Posted by doinbox View Post
    Your issue is more than likely the scanner bed has dropped because there is no support at the front left corner. Get your hands underneath the scanner bed and lift it up. It might take a few attempts. I carefully use a car jack in the workshop to resolve this. Hope this helps
    Thank you very much for your advice , Scanner bed lift up and problem solved.

  8. #8
    Field Supervisor 500+ Posts
    Biz hub c 220 Copy issue


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    635
    Rep Power
    24

    Cool Re: Biz hub c 220 Copy issue

    Quote Originally Posted by doinbox View Post
    Your issue is more than likely the scanner bed has dropped because there is no support at the front left corner. Get your hands underneath the scanner bed and lift it up. It might take a few attempts. I carefully use a car jack in the workshop to resolve this. Hope this helps
    yeah i think using a jack onsite at customer's might get you some funny looks

  9. #9
    Service Manager 1,000+ Posts
    Biz hub c 220 Copy issue


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    1,509
    Rep Power
    51

    Re: Biz hub c 220 Copy issue

    Yeah I hear you about the jack. If I showed up with a jack some of my customers would ask if I could rotate their tires while there

  10. #10
    Technician
    Join Date
    Jan 2013
    Posts
    18
    Rep Power
    13

    Re: Biz hub c 220 Copy issue

    Quote Originally Posted by rrrohan View Post
    yeah i think using a jack onsite at customer's might get you some funny looks
    That’s why I said in the workshop. But seriously this is a massive design flaw since C253 range that has never changed. Kyocera’s are nice and sturdy in that area.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •