then pagescope normally should work.
try http:// instead of https://
even without SSL the non SSL page should open.
is there something to click on the page like advanced and accept connection anyway?
then pagescope normally should work.
try http:// instead of https://
even without SSL the non SSL page should open.
is there something to click on the page like advanced and accept connection anyway?
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
REACH FOR THE STARS!!!
Konica Minolta Planetariums!
https://www.konicaminolta.com/planet...gma/index.html
please post a screenshot of the error page.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
REACH FOR THE STARS!!!
Konica Minolta Planetariums!
https://www.konicaminolta.com/planet...gma/index.html
Password = 12345678
Machine had all settings cleared in service mode. Definitely a head scratcher! I initially thought it was the hard drive but swapped it with one from another machine, reformatted & reinstalled firmware. Real problem, another machine of the same model is exhibiting the same "problem"!!!
Sent from my SM-N950U1 using Tapatalk
REACH FOR THE STARS!!!
Konica Minolta Planetariums!
https://www.konicaminolta.com/planet...gma/index.html
honestly it looks like a password issue. i have hundreds of machines that dont have SSL and i can still login.
i would try a system data reset again, turn ther HDD back on and run the latest firmware.
if that still does not work in service mode select reset admin password and use the standard 1-8 once see if that helps.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Just for clarity. Does the Administrator password you enter into Pagescope on the web interface work when entered from the panel of the copier?
Nevermind: just saw where you posted earlier that you can get into Admin mode from the panel.
REACH FOR THE STARS!!!
Konica Minolta Planetariums!
https://www.konicaminolta.com/planet...gma/index.html
Drop the function version down by one level, restart, bring function version to current level (matched to installed f/w version), restart. This should allow you to access via PSWC. Emujo
Bookmarks