Bizhub C754 Keep Showing Cleaning In Progress

[Naveed Shahid]

Hello Every One

Bizhub c754 keep showing Cleaning In Progress After Finishing Print Jobs Some Time In Print Job Machine Stop Printing And Keep Showing Cleaning In Progress
I Changed Trasfer Belt And Disable Auto Cleaning Trasfer Belt But Still Same Problem

Plz Advise me

Thanks
Reagards

[Synthohol]

did you slide the shield over and clean the two windows over the sensors under the belt?

[Naveed Shahid]

did you slide the shield over and clean the two windows over the sensors under the belt?

Yes i clean sensor still same

[tsbservice]

Update the Firmware of the machine as KM should fixed this with GD1-70 version.

[Naveed Shahid]

Update the Firmware of the machine as KM should fixed this with GD1-70 version.

Thanks for solution
I update the firmware problem solved but now showing c1144 finisher type fs 534 before updating firmware finisher working fine now keep showing c 1144 after firmware update any idea

Thanks

[Synthohol]

check all the belts on the exit assy, ive had them slip off or even the clock disk falls off.