Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Service Manager 1,000+ Posts digicor's Avatar
    Join Date
    Jul 2008
    Location
    tampa Florida
    Posts
    1,127
    Rep Power
    45

    kmbhC764e firmware issue

    i have the folder FWselect,on a 1 gig usb, formatted to fat32
    when i start the machine this pops up
    memory slot cant be used or unavailable at this time????
    im using the service slot under the cover
    can this be de activated? or turned off? in a ricoh you can go into service mode and activate or de activate the usb and the nic
    is this possibly the case or no?
    any help would be appreciated

  2. #2
    Master Of The Obvious 10,000+ Posts
    kmbhC764e firmware issue

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,434
    Rep Power
    462

    Re: kmbhC764e firmware issue

    Are you using the firmware port under the little access door at the rear? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Field Supervisor 500+ Posts Woxner's Avatar
    Join Date
    Jul 2011
    Location
    Felixstowe England
    Posts
    779
    Rep Power
    41

    Re: kmbhC764e firmware issue

    and no cant be turn off. clear the usb and just put the files in the folder on the drive. then it shoud work. will probably be about 400 files or so. just control a when highlighted just copy and past.

  4. #4
    Service Manager 2,500+ Posts
    kmbhC764e firmware issue


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    3,822
    Rep Power
    133

    Re: kmbhC764e firmware issue

    Like wox said. delete everything off the usb flash drive. then "select all" individual files and move or copy "just" the files to the usb flash drive. After turning machine on sometimes it can take 5+ mins for the F/W screen to appear.

  5. #5
    Senior Tech 250+ Posts
    Join Date
    Oct 2008
    Location
    Long Island, NY
    Posts
    435
    Rep Power
    37

    Re: kmbhC764e firmware issue

    By "wipe the drive" it's actually recommended to format it - twice. Once with NTFS to remove the formatting entirely, and then again with FAT32 to put it back.

  6. #6
    Certified Konica Expert 2,500+ Posts
    kmbhC764e firmware issue

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,914
    Rep Power
    216

    Re: kmbhC764e firmware issue

    Quote Originally Posted by mascan42 View Post
    By "wipe the drive" it's actually recommended to format it - twice. Once with NTFS to remove the formatting entirely, and then again with FAT32 to put it back.
    who said that? in my 20 years i never heard or needed to format ntfs first.
    We know a thing or two because we've seen a thing or two.
    Also don't ask me for files without a contributor badge.

  7. #7
    Service Manager 1,000+ Posts digicor's Avatar
    Join Date
    Jul 2008
    Location
    tampa Florida
    Posts
    1,127
    Rep Power
    45

    Re: kmbhC764e firmware issue

    thanks to you all ,
    i will re do it as you guys say
    my man said to put a FWselect folder on then subfolder any title i wanted then the fw
    thanks again

  8. #8
    Service Manager 1,000+ Posts
    Join Date
    Mar 2017
    Posts
    1,564
    Rep Power
    73

    Re: kmbhC764e firmware issue

    The FWSelect folder allows you to have multiple f/w on one USB. Just put everything in the firmware folder on the root of the USB, no top level folder. If the MFP does not see the drive as containing firmware info it will just boot to the normal copy screen. If it can detect that firmware is on the drive it will either boot to the install f/w screen or display an incorrect f/w message. I have had to use a HP format tool to get some of my USB drives able to work with firmware again. Takes about 1/2 hour to fully format. After re reading your post, double check that the MFP recognizes the USB cover has been lifted. (service mode I/O check). If the sensor has been dislodged, or is not working, the MFP reads this USB port as any of the other ports, and if you have USB ports disabled it will not allow the device to be used. Emujo

  9. #9
    Service Manager 1,000+ Posts digicor's Avatar
    Join Date
    Jul 2008
    Location
    tampa Florida
    Posts
    1,127
    Rep Power
    45

    Re: kmbhC764e firmware issue

    ok the firmaware loaded after i just put it all on the root drive,but not the movie data, i had the movie data in a folder in on the root drive, can the movie data be done separately?
    by it self on the usb?
    or should i open it out of the folder and put it on the root drive instead of it in its folder?
    thanks for the advice

  10. #10
    Service Manager 1,000+ Posts
    Join Date
    Mar 2017
    Posts
    1,564
    Rep Power
    73

    Re: kmbhC764e firmware issue

    Movie data goes on the root, but you can have many movie files as the MFP will look for the correct file. The update is done through service mode/system2/data install, and can be done vis any USB port. I usually just use the port on the control panel. Emujo

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here