Hi everyone
looking for Konica Minolta c284e Firware G20-J6.
Please advise if someone can send me. Will b a great help.
Thanks a lot
mearmi@hotmail.com
Hi everyone
looking for Konica Minolta c284e Firware G20-J6.
Please advise if someone can send me. Will b a great help.
Thanks a lot
mearmi@hotmail.com
What problem you are facing? pl. describe.
the latest M1 FW supports airprint.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Don’t forget to update the function version or it still won’t airprint.😀
Can u please send me
Thanks
mearmi@hotmail.com
Hello, I recently had to change the MFPB for a Konica Minolta Bizhub c284e, but I need the firmware (G20-J9) I could not get it and the machine still does not work.
Could you help me with this? If it is necessary to cancel by the firmware, indicate me the value and as payment.
Thank you
dherhut@yahoo.es
I have tried to install the firmware according to the instructions of the technical manual of the machine, but it has not been possible for me. I do not read the pendrive, I have tried several and the closest to the firmware update is that the format is not correct .... Change the MFP, because it threw the error c 6901. with the new MFP throws the same error. I have tried everything and I can not get the machine to work. Any suggestions?
Thank you
ok first off, the 6901 code is for the dual scan board you mount to the mfp board.
is it good?
put the old mfp back and leave the dual scan board off and unplug the doc feeder other wires.
if no codes and you can make copies there is your issue i think.
the code is fordid you swap to a single sided feeder?
DSC board mount failure 1 Trouble code C6901 Rank C Detection timing When MFP detects that DSC board/1 (front side) is not properly installed.
is the right feeder selected in service mode?
details please why change the MFP board for the DSC issue? especially if the code comes right back with the new MFP?
also M1 is the firmware you want, J9 is hella old.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Bookmarks