Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1
    Senior Tech 100+ Posts
    Konica Minolta C284e Firmware

    mearmi's Avatar
    Join Date
    Oct 2010
    Posts
    218
    Rep Power
    21

    Konica Minolta C284e Firmware

    Hi everyone

    looking for Konica Minolta c284e Firware G20-J6.

    Please advise if someone can send me. Will b a great help.

    Thanks a lot

    mearmi@hotmail.com

  2. #2
    Senior Tech 100+ Posts Zesti's Avatar
    Join Date
    Jun 2009
    Posts
    164
    Rep Power
    22

    Re: Konica Minolta C284e Firmware

    What problem you are facing? pl. describe.

  3. #3
    Senior Tech 100+ Posts
    Konica Minolta C284e Firmware

    mearmi's Avatar
    Join Date
    Oct 2010
    Posts
    218
    Rep Power
    21

    Re: Konica Minolta C284e Firmware

    Quote Originally Posted by Zesti View Post
    What problem you are facing? pl. describe.

    Thanks for your replying. Client needs to get AirPrint

  4. #4
    Service Manager 1,000+ Posts
    Konica Minolta C284e Firmware

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    2,164
    Rep Power
    44

    Re: Konica Minolta C284e Firmware

    the latest M1 FW supports airprint.

  5. #5
    Field Supervisor 500+ Posts
    Join Date
    Jan 2009
    Location
    UK
    Posts
    625
    Rep Power
    30

    Re: Konica Minolta C284e Firmware

    Donít forget to update the function version or it still wonít airprint.😀

  6. #6
    Service Manager 1,000+ Posts
    Konica Minolta C284e Firmware

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    2,164
    Rep Power
    44

    Re: Konica Minolta C284e Firmware

    Quote Originally Posted by tech51 View Post
    Donít forget to update the function version or it still wonít airprint.😀
    Good reminder I forget most people don't read the read me file

  7. #7
    Senior Tech 100+ Posts
    Konica Minolta C284e Firmware

    mearmi's Avatar
    Join Date
    Oct 2010
    Posts
    218
    Rep Power
    21

    Re: Konica Minolta C284e Firmware

    Quote Originally Posted by Synthohol View Post
    the latest M1 FW supports airprint.
    Can u please send me

    Thanks

    mearmi@hotmail.com

  8. #8
    Junior Member dherhut's Avatar
    Join Date
    Oct 2018
    Location
    santiago
    Posts
    5
    Rep Power
    0

    Re: Konica Minolta C284e Firmware

    Quote Originally Posted by Zesti View Post
    What problem you are facing? pl. describe.
    Hello, I recently had to change the MFPB for a Konica Minolta Bizhub c284e, but I need the firmware (G20-J9) I could not get it and the machine still does not work.
    Could you help me with this? If it is necessary to cancel by the firmware, indicate me the value and as payment.
    Thank you
    dherhut@yahoo.es

  9. #9
    Junior Member dherhut's Avatar
    Join Date
    Oct 2018
    Location
    santiago
    Posts
    5
    Rep Power
    0

    Re: Konica Minolta C284e Firmware

    I have tried to install the firmware according to the instructions of the technical manual of the machine, but it has not been possible for me. I do not read the pendrive, I have tried several and the closest to the firmware update is that the format is not correct .... Change the MFP, because it threw the error c 6901. with the new MFP throws the same error. I have tried everything and I can not get the machine to work. Any suggestions?
    Thank you

  10. #10
    Service Manager 1,000+ Posts
    Konica Minolta C284e Firmware

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    2,164
    Rep Power
    44

    Re: Konica Minolta C284e Firmware

    ok first off, the 6901 code is for the dual scan board you mount to the mfp board.
    is it good?
    put the old mfp back and leave the dual scan board off and unplug the doc feeder other wires.
    if no codes and you can make copies there is your issue i think.

    the code is for
    DSC board mount failure 1
    Trouble code C6901
    Rank C
    Detection timing When MFP detects that DSC board/1 (front side) is not properly installed.
    did you swap to a single sided feeder?
    is the right feeder selected in service mode?
    details please why change the MFP board for the DSC issue? especially if the code comes right back with the new MFP?

    also M1 is the firmware you want, J9 is hella old.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here