Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Technician
    Join Date
    Apr 2017
    Location
    Tananarive Madagascar
    Posts
    13
    Rep Power
    4

    Red face White traces when printing black on Konica Bizhub C220

    Hello,
    I wish i'm in the right forum and thank you for all your advices.

    I have Konica Bizhub C220 and since yesterday when a i print or copy in black, i have some white traces (please find in attachements).

    When printing in color those traces is only where black are.

    This sample is printed in landscape mode.

    I think it's related in black unit but don't know exactly what.

    Thank again

    Attached Images Attached Images

  2. #2
    Senior Tech 100+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    170
    Rep Power
    25

    Re: White traces when printing black on Konica Bizhub C220

    What about consumables live? Looks like your black developer needs to be replaced.

    Never argue with an idiot. They will drag you down to their level and beat you with experience.

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Jun 2016
    Location
    Kansas
    Posts
    166
    Rep Power
    6

    Re: White traces when printing black on Konica Bizhub C220

    I agree with TBSSERVICE definitely needs black developer, if it is not way past maintenance there is a charge issue, either way the black developer needs changed.


  4. #4
    Senior Tech 100+ Posts
    Join Date
    May 2016
    Posts
    165
    Rep Power
    7

    Re: White traces when printing black on Konica Bizhub C220

    Bad drum unit cases such issues.
    Replace black drum unit (OEM) and inspect developing unit black.

    According to the picture this developing unit can be regenerated by itself through developer particles in toner (OEM) bottle, after few thousands printouts.


  5. #5
    Technician
    Join Date
    Apr 2017
    Location
    Tananarive Madagascar
    Posts
    13
    Rep Power
    4

    Re: White traces when printing black on Konica Bizhub C220

    Thank you very much,

    i think you're right because the problems begin after i used a non original toner with black.

    does the developper can't be cleaned or something else to do with parameters adjusment but directly to be replaced?


  6. #6
    Trusted Tech 50+ Posts
    Join Date
    Feb 2018
    Location
    Kankakee, Il
    Posts
    59
    Rep Power
    2

    Re: White traces when printing black on Konica Bizhub C220

    More than likely you will have to replace the developer unit. Have seen cases though that will clear up with OEM toner and run several hundred copies/prints.


  7. #7
    Field Supervisor 500+ Posts guitar9199's Avatar
    Join Date
    Sep 2016
    Location
    Eveleth, MN
    Posts
    503
    Rep Power
    13

    Re: White traces when printing black on Konica Bizhub C220

    Most of the online documentation I've seen on this model says replace the drum and developer unit at the same time. You probably have a bunch of black developer in your waste toner box.


  8. #8
    Field Supervisor 500+ Posts
    Join Date
    Mar 2013
    Location
    Meridian, MS
    Posts
    632
    Rep Power
    21

    Re: White traces when printing black on Konica Bizhub C220

    Quote Originally Posted by jaderyan View Post
    Thank you very much,

    i think you're right because the problems begin after i used a non original toner with black.

    does the developper can't be cleaned or something else to do with parameters adjusment but directly to be replaced?
    White traces when printing black on Konica Bizhub C2203rd. Party Toner!!! Too many problems. Not enough consistency --and that's a guaranteed FACT!!! The only time I've used non OEM is/was in the all-in-one HP drum-developer units on a color printer. The brand was Verbatim purchased from Provantage. Don't go for some low drawer bottom dollar shite. I know that some brands (katun) "guarantee" their shite....but the when you go to get a refund for faulty toner, that's when the crap begins!!! The only non OEM toner at my work that was installed and worked properly was NA Trading toner for Savin 9040/9050 and that was to correct a problem where the OEM toner would coat the mag roller and it would have to be scrubbed off with a 3M scrub pad, thus shortening the life of the developer. So my general advice is to stay away from non OEM 3rd. Party toner it usually creates more service callbacks than necessary--time is money. You catch my drift!!!White traces when printing black on Konica Bizhub C220

    Sent from my SM-N950U1 using Tapatalk

    REACH FOR THE STARS!!!
    Konica Minolta Planetariums!
    https://www.konicaminolta.com/planet...gma/index.html

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •