Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
  1. #11
    Technician
    Join Date
    Jun 2009
    Posts
    31
    Rep Power
    20

    Re: BizHub C554 paper jam at fuser exit

    Quote Originally Posted by 3ktlc View Post
    Check the registration rollers and bushings. Had a couple jamming in the fuser. Turned out to be the bushings.
    Thank you 3ktlc! I went thru that entire section and made sure everything was moving easily and properly...I am further investigating cl8! I have a feeling that is where my troubles are but have another machine im working on that is desperately needed.

    Sent from my SM-G955U using Tapatalk


  2. #12
    Master Of The Obvious 10,000+ Posts
    BizHub C554 paper jam at fuser exit

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    16,555
    Rep Power
    272

    Re: BizHub C554 paper jam at fuser exit

    Quote Originally Posted by printprocc View Post
    Thank you 3ktlc! I went thru that entire section and made sure everything was moving easily and properly...I am further investigating cl8! I have a feeling that is where my troubles are but have another machine im working on that is desperately needed.

    Sent from my SM-G955U using Tapatalk
    The 30-03 is clutch CL8. Have one on hand before you disassemble. It will take a bit of work. And make sure that you change the correct clutch. There are two clutches in the exit unit. =^..^=

    CL8_1.JPGCL8_2.JPG

    Attached Files Attached Files
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  3. #13
    Technician
    Join Date
    Jun 2009
    Posts
    31
    Rep Power
    20

    Re: BizHub C554 paper jam at fuser exit

    Quote Originally Posted by blackcat4866 View Post
    The 30-03 is clutch CL8. Have one on hand before you disassemble. It will take a bit of work. And make sure that you change the correct clutch. There are two clutches in the exit unit. =^..^=

    CL8_1.JPGCL8_2.JPG
    Ok so this HAS to be the problem...I did find a lot of what looks like iron oxide debris so this is at least a good start. Also looks like somebody but grease all over this at some point..SMH.... I will order a clutch today and update this thread next week.

    Sent from my SM-G955U using Tapatalk


  4. #14
    Master Of The Obvious 10,000+ Posts
    BizHub C554 paper jam at fuser exit

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    16,555
    Rep Power
    272

    Re: BizHub C554 paper jam at fuser exit

    Yeah. Somebody gave CL8 an oil bath once it had rusted. That always makes magnetic clutches work better (NOT!!)
    =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  5. #15
    Technician
    Join Date
    Jun 2009
    Posts
    31
    Rep Power
    20

    Re: BizHub C554 paper jam at fuser exit

    Hello everyone. Just wanted to chime in and thank you ALL for the valuable input given. My issue was indeed cl8 and it has been replaced and the machine is up and running!
    As always you've all provided exceptional insight and I am grateful!

    Sent from my SM-G955U using Tapatalk


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •