Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 10 of 10
  1. #1
    Ghoulscout 500+ Posts Kidaver's Avatar
    Join Date
    Apr 2011
    Location
    Texas
    Posts
    912
    Rep Power
    45

    Bizhub c3110 Replace Toner K

    I have 2 of these machines both of them doing the exact same thing. It pops up asking to Replace Toner K. I have replaced toners. Replaced the IU. Upgraded F/W. Nothing has made this message go away. Has anyone had this issue and any advice you can share?

    As I was typing this I know have a Bizhub C3100p now doing the exact same thing. This has kinda escalated into an emergency situation.
    "In a cruel and evil world, being cynical can allow you to get some entertainment out of it."

  2. #2
    Multibrands Tech 250+ Posts rapidocument's Avatar
    Join Date
    Jul 2012
    Location
    Los Angeles, CA.
    Posts
    383
    Rep Power
    27

    Re: Bizhub c3110 Replace Toner K

    Have you seen this thread (same problem)?


    C 3110 - showing replace toner (K)

    Check that first,

    Good luck.

  3. #3
    Ghoulscout 500+ Posts Kidaver's Avatar
    Join Date
    Apr 2011
    Location
    Texas
    Posts
    912
    Rep Power
    45

    Re: Bizhub c3110 Replace Toner K

    Quote Originally Posted by rapidocument View Post
    Have you seen this thread (same problem)?


    C 3110 - showing replace toner (K)

    Check that first,

    Good luck.
    I've seen that thread and have even posted in it before. The solutions they offer are for Missing IU problems not Toner problems. A resolution was never posted in it either.
    "In a cruel and evil world, being cynical can allow you to get some entertainment out of it."

  4. #4
    Service Manager 1,000+ Posts
    Join Date
    Apr 2009
    Location
    LaPorte Indiana
    Posts
    1,054
    Rep Power
    43

    Re: Bizhub c3110 Replace Toner K

    This goes back to the 4690 series. These machines look for toner dropping thru the chute into the IU unit auger, and how much toner is in the IU unit. If you don't lock the
    toner correctly, or if the foam seal rips off and blocks chute, or if auger in IU unit can't keep up, then you get replace toner. You MUST replace IU and TONER at same time to reset.
    Hate to say it, but that has been the only fix that works. We have tried shaking IU to mix toner. No luck.

  5. #5
    service technician 50+ Posts
    Join Date
    Feb 2018
    Location
    Kankakee, ill
    Posts
    51
    Rep Power
    13

    Re: Bizhub c3110 Replace Toner K

    since you have replaced the toner and iu then check the mechanical of toner replenishment, the sensors seems to work but is the drive to toner cartridge then not working.

  6. #6
    Service Manager 5,000+ Posts
    Bizhub c3110 Replace Toner K

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,558
    Rep Power
    182

    Re: Bizhub c3110 Replace Toner K

    Simalar issue on the C35 series.

    Try the TNR-CLR in CE mode.
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  7. #7
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,143
    Rep Power
    346

    Re: Bizhub c3110 Replace Toner K

    As copier tech said. Try to use ENGINE DIPSW. It is under System 2 > Soft switch > 28 , set this to 1 to force clear toner empty state, then return it to 0.
    Good luck
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  8. #8
    Senior Member 100+ Posts
    Join Date
    Sep 2017
    Location
    Durban
    Posts
    109
    Rep Power
    16

    Re: Bizhub c3110 Replace Toner K

    Service mode - machine - release mode - new release. Be sure to set it back to NO RELEASE once it detects the toner.

  9. #9
    Former KM Senior Tech 500+ Posts srvctec's Avatar
    Join Date
    Oct 2009
    Location
    Central Kansas
    Posts
    827
    Rep Power
    63

    Re: Bizhub c3110 Replace Toner K

    Quote Originally Posted by tsbservice View Post
    As copier tech said. Try to use ENGINE DIPSW. It is under System 2 > Soft switch > 28 , set this to 1 to force clear toner empty state, then return it to 0.
    Good luck
    I don't think there is a System 1 or 2 in these small desktop machines.

  10. #10
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,143
    Rep Power
    346

    Re: Bizhub c3110 Replace Toner K

    Quote Originally Posted by srvctec View Post
    I don't think there is a System 1 or 2 in these small desktop machines.
    In fact there are SYSTEM 1 and SYSTEM 2 on this machine. It is in Manual.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here