Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Junior Member
    Join Date
    May 2011
    Posts
    7
    Rep Power
    0

    konica minolta bizhub 1200 display pannel not responding

    Hay , Bizhub 1200 touch display and numeric keys are not working . I mean any key on operation panel & touch display not working at all . All the hard keys on panel checked one by one , none of them is stucked or pressed . Machine is working as printer but not copying . Massage on display ready to copy .Open any door or cover display will show as you open the part .
    Any one having information abuot this problem . please help me .

  2. #2
    Junior Member
    Join Date
    Feb 2013
    Location
    athens
    Posts
    8
    Rep Power
    0

    Re: konica minolta bizhub 1200 display pannel not responding

    Hi there
    It seems to me like a touch screen problem.You can check it by yourself,just pull out the flat cable that connect the touch screen with operation panel PCB.
    By doing so,your hard keys should be operational,after that you have to change the touch screen or use a mouse.

  3. #3
    Senior Tech 250+ Posts
    konica minolta bizhub 1200 display pannel not responding

    wjurls's Avatar
    Join Date
    Feb 2017
    Location
    Riverside, CA
    Posts
    401
    Rep Power
    29

    Re: konica minolta bizhub 1200 display pannel not responding

    Typically caused by a defective touch screen. Do as suggested above. If touch screen bad, either use a mouse or find an oem screen replacement. Aftermarket touch panels are crap.

  4. #4
    Service Manager 2,500+ Posts
    konica minolta bizhub 1200 display pannel not responding


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    3,831
    Rep Power
    133

    Re: konica minolta bizhub 1200 display pannel not responding

    Bad touch screen will not affect the hard keys. I would reseat all connectors. Also would remove op panel and squirt some alcohol on switches then blow out with air.

    * Just a tip for you or anyone not knowing this, use denatured not rubbing alcohol so no water is in it and avoid shorting out pwb.

  5. #5
    Senior Tech 250+ Posts jotunn's Avatar
    Join Date
    Jan 2010
    Posts
    409
    Rep Power
    47

    Re: konica minolta bizhub 1200 display pannel not responding

    When touch-panel is "shorted" (when pressed for example), hard keys are disabled (non-responsive).
    Panels can be shorted with deep scratches, moist, dirt or crumbs behind the frame, broken positioning pins and so on.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here