Quick question please, exit rubbers have split & fallen out so paper doesnt exit very well jams or wrinkles so have ordered a new exit roller. My question is how does it come out!? No explanation in the CE manual.
Thanks: 0
Likes: 0
Dislikes: 0
Quick question please, exit rubbers have split & fallen out so paper doesnt exit very well jams or wrinkles so have ordered a new exit roller. My question is how does it come out!? No explanation in the CE manual.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
which ones? follow the clutch replacement on page g-61 in the SM to remove the exit unit. the scanner has to come off.
btw, can you just roll electrical tape on the crappy rollers?
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
[QUOTE=Synthohol;711300]which ones? follow the clutch replacement on page g-61 in the SM to remove the exit unit. the scanner has to come off.
btw, can you just roll electrical tape on the crappy rollers?
Item 16 rubber has gone so just need that roller out to fit a new one, I did think about using rubber tape, but they are also used to pull paper back in for duplex not sure how reliable that would be!?
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Be careful taking the scanner off. Those ribbon connectors are very delicate.
Reply With Quote
Bookmarks