Hello,
I'm not tech, but I can make my way around software/hardware issues.
My machine have FS-535, SD-512, PK-521, and FAX (that I would maybe like to disable/remove if it's possible).
First I had problem
C E-004
Because manual stated that it could be DIMM or board failure, and Konica wanted too much money to fix it, I started with holding reset on boot.
That did not work so i went with -
STOP 00 STOP 01.
First I run diagnostic, everything's fine.
Reset everything that I think of. I even needed to put new admin password on with
STOP 0 C after that.
I removed the HDD, formatted it - check for errors on windows 7 machine - that's fine.
Then I put it in the machine, and I format it there (machine prompt me to do so).
Now I have problem
C D-012
ATTENTION1Preparing Scan/Fax...
Preparing User Box...
No Animation Guide available. Contact your service rep.
If anyone can help with this, would be great.
Maybe latest Firmware, Animation Guide files (if they are needed)...
I really don't know - Magic USB stick that fix everything will do
Bookmarks