Problem with BHC 454

[myster]

When printing the paper rubs with these parts of the fuser and the strip producing friction in the image
IMG_20181121_174524.jpgmuestra.jpgIMG_20181121_1745551.jpg

Thanks Gracias

[Synthohol]

try checking/adjusting Fuser Transport speed under Machine in tech rep

[myster]

try checking/adjusting Fuser Transport speed under Machine in tech rep

Si eso es lo que he modificado, tambien he eliminado la guia negra de la banda de transferencia, y parece que funciona.
Aun asi no creo que esa sea la solución correcta, estoy pendiente de lo que me diga el cliente
Gracias

If that's what I modified, I've also eliminated the black guide from the transfer band, and it seems to work.
Even so, I do not think that is the right solution, I am aware of what the client tells me.


Thanks!!

[allan]

On thick stock even the roller marks remain on the prints with this model.

[mincopier]

It's either fuser speed or the fuser itself may have a problem allowing the paper to slip and not be pulled fast enough.