Thanks: 0
Dislikes: 0
Password after replace Drum on Bizhub 283
I just doing with Konica, the bizhub 283 need password after replaced Drum Unit, I already try 92729272, 00000000, 12345678 but nothing work, the old suplier ask me bring the board to flash the firmware ... 50$(
Could someone help me?
There the tool NVRam resetting?
My email: kazihaha@yahoo.com
Thanks so much.
Last edited by kazihaha; 11-28-2018 at 08:46 AM. Reason: Sorry wrong brand name
RTFMOriginally Posted by kazihaha
I just doing with Toshiba, the bizhub 283 need password after replaced Drum Unit, I already try 92729272, 00000000, 12345678 but nothing work, the old suplier ask me bring the board to flash the firmware ... 50$
Could someone help me?
There the tool NVRam resetting?
My email: kazihaha@yahoo.com
Thanks so much.
or GTFM
Sorry what's that? I'm new to Konica
First get at least Service Manual, read it, then ask Questions.
Means that original password was changed and with OR without Manual you has to ask those who sell you machine for it.
There is a chance if you donate here somebody send you Firmware.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
the drum unit automatically rests the counter and you can do the gradations through admin mode.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Counters have to be reset manually on the BH283. Also so have to run TCR adjustment in service mode. Without service password these steps can't be done.
RTFM = Read The F'ing Manual
GTFM = Get The F'ing Manual
Aw man, sorry about the bad info, I've worked on so many 4 5 7 8 and 9 series I totally forgot the legacy machines.
Also I hope the developer was changes too or you will likely get 255x codes. Both drum and dv are replaced as a set.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
You have to 1) get the CE password or 2) reset the CE password:
1) contact the genius who changed it.
2) place a hotline call, and provide the 20 digit reset code. KM then provides you with a 20 digit code to enter, to reset the CE password to it's default.
Those are your only two choices. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
The one who change the password is technician of Master Dealer here, they do not want their customer have other supplier.
How much does it cost for Password crack? If I donate 10$, is it OK?
Likes: 
Reply With Quote
Bookmarks