Page 3 of 3 FirstFirst 123
Results 21 to 23 of 23
  1. #21
    Technician
    Join Date
    May 2018
    Location
    uiae
    Posts
    11
    Rep Power
    2

    Re: Konica Minolta C253 (Develop Ineo+ 253) - HDD Error - Enter Service Mode during E

    Quote Originally Posted by CopierNerd View Post
    Try reconnecting the HDD cable to the board and then check if it works. I wish i could have firmware for you.

    I disconnected the cable from the board. Same error. D004
    Then I reconnected everything and it gives me the wrong format error again.

    Pressing the utlity button doesn't do anything

    I am a little lost with this problem. We will probably get a new one since we rely on a copier and our company needs it....

  2. #22
    Senior Tech 100+ Posts Zesti's Avatar
    Join Date
    Jun 2009
    Posts
    147
    Rep Power
    21

    Re: Konica Minolta C253 (Develop Ineo+ 253) - HDD Error - Enter Service Mode during E

    I believe ur FW is corrupted and so is the HDD. Have u got FW?

  3. #23
    Technician
    Join Date
    May 2018
    Location
    uiae
    Posts
    11
    Rep Power
    2

    Re: Konica Minolta C253 (Develop Ineo+ 253) - HDD Error - Enter Service Mode during E

    Quote Originally Posted by Zesti View Post
    I believe ur FW is corrupted and so is the HDD. Have u got FW?
    No I don't have a FW.

    Well then this printer goes to the dump... too bad.
    Or I gift it to someone who can fix it.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •