Konica Minolta C224e from Tray2 Paper size detecting as 11x17
Konica Minolta C224e from Tray2 Paper size detecting as 11x17
[QUOTE=musthafavi;715208]Konica Minolta C224e from Tray2 Paper size detecting
Change parts below
image.jpg
Usually a broken wire on the connector as it plugs into the size block. Easily repairable if you know how to use a soldering iron.
Not that common but had that before where the wire breaks of right next to the connector.
Still not sure how a feed roller fixes a tray size detection problem??
Hate those timing jams J-99XX but it point you in the right direction if the machine tells
you to check paper size in the tray.
Whatever
Bookmarks