Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: FS-534 jamming

  1. #1
    Service Manager 1,000+ Posts
    FS-534 jamming


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    1,311
    Rep Power
    46

    FS-534 jamming

    Intermittent jams. Fine when going onto top tray. From what I see on bottom tray the joggers aren't opening all the way. Strange thing is they open fine and all good when copying, they just don't open far enough (need to open about an inch more) when printing. Checked the settings for printing, first thing came to mind was it was set for a little smaller paper like Eur A4 or something. Also is fine if you select staple from print driver. Just plain printing has the issue of joggers not opening far enough.

    If I didn't see it myself I wouldn't believe it. What could be different printing and copying using the finisher.

  2. #2
    Master Of The Obvious 10,000+ Posts
    FS-534 jamming

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    16,601
    Rep Power
    275

    Re: FS-534 jamming

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  3. #3
    Service Manager 1,000+ Posts
    FS-534 jamming


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    1,311
    Rep Power
    46

    Re: FS-534 jamming

    Hey BC, some interesting stuff. I read a lot of it and will check it out further when I have a little more time.

    Any idea why it only does it when printing? Like I posted copying is fine from same paper drawer, etc. Also if they select stapling when printing the joggers open up all the way fine.

  4. #4
    Master Of The Obvious 10,000+ Posts
    FS-534 jamming

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    16,601
    Rep Power
    275

    Re: FS-534 jamming

    Anecdotally I've hear from endusers the printing is more of a problem, but from what I've seen myself, it affects anything fed to the stapling tray. Additionally, the front-to-back positioning of the paper in each tray can make a difference ... but is not any kind of a solution. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •