Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Mar 2017
    Location
    Tampa, Florida
    Posts
    71
    Rep Power
    4

    Bizhub 223 with C-C163

    Does anyone know what might be causing this problem? I replaced the mfp from one machine to another due to a different problem. Now it codes C-C163.

    I tried firmware but it doent give the mfp as an option too update.

    Any ideas?

  2. #2
    Service Manager 1,000+ Posts
    Bizhub 223 with C-C163

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    1,762
    Rep Power
    34

    Re: Bizhub 223 with C-C163

    because the boards marry their respective hosts.
    you may get lucky and check/change the machine type when booting from a FW stick, may be the correct machine and type to the serial# of the host.
    if the machine and type are correct, try moving over the PRCB it was initially married to.
    which SSD card did you install on this one?



    3.15.7 CC163
    (1) Contents
    Trouble type ROM contents error (PRT)
    Trouble code CC163
    Rank C
    Detection timing The wrong model of firmware is detected in the engine during the initial connection to the engine is be
    checked.
    Trouble isolation -
    Relevant electrical parts Printer control board (PRCB)
    (2) Procedure
    Step Action Control signal Location of electrical co
    1 Unplug and plug the power cord from/into the outlet, turn the
    main power switch OFF, wait 10 seconds or more, and turn
    it ON.
    - -
    2 Rewrite the firmware. - -
    3 Change PRCB - -

  3. #3
    Aging Tech 1,000+ Posts
    Bizhub 223 with C-C163


    Join Date
    Jul 2013
    Location
    Desboro
    Posts
    1,755
    Rep Power
    43

    Re: Bizhub 223 with C-C163

    The MFP boards are different between BH223/283 and BH363/423. Also, you have to take the NVRam from the original MFP and install it on the replacement MFP

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •