BH c346e "failure to complete print job"

[digicor]

Could be as simple as firmware.
The KM XPS driver is crap use the PCL drivers only.
Except for missing options the windows driver works fine.

Did you give that HDD a format? But the machine should print fine without the HDD.

do you have the firmware for this machine?or know some who has access to it?
i could use it,

[digicor]

checking into it today, ill repost what i find out

[allan]

Sorry i got cut off from the portal...

[digicor]

okay, i loaded up the Km pcl drivers, i checked and re set the memory, its 2 gig, (sec said she got a "out of memeory code on two page print) i narrowed it down to her computer, somehow, i re installed the km drivers on hers and all the rest
it tested to no end, ran like a scolded dog,flew paper out like a mad volcano,, all with no HDD and 2 gigs of memory. so it will run without an hdd scan to email and print.I realize if this were a mtg co , 2gigs may not be enough, but this is a three man insurance office, and one of them is a woman... LOL
thanks for all the help

[allan]

Have had RAM shortage problems with ID&Print and Box print where the machine also locked up where an extra 2Gb DIM did the trick.
But was like 20 clerks constantly assaulting the machine.

Nice hunt down.

You mean womxn...

[digicor]

i have firmware, now, but im going with "if it aint broke dont fix it" until something else comes up
the machine seems to be running good after all this,
again thanks for all the input