Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1
    Field Supervisor 500+ Posts digicor's Avatar
    Join Date
    Jul 2008
    Location
    tampa Florida
    Posts
    760
    Rep Power
    29

    BH c346e "failure to complete print job"

    Why would the machine say this? I have had issues with this machine on print jobs, the hdd is disabled and removed, it scans to email and copies just fine, when you turn it off and back on all the print jobs flow right out...

    i have un installed and re installed it, it works great then hour or so later the client calls with this , Failure to complete job, just got a text saying it started printing again,,, ?
    im running windows driver for the KMBH thats in the win 10 i think its ps color laser xps, like i stated it runs fine , then it hangs up,
    then prints,
    any ideas? .
    ive ran this driver just this morning on the same machine on another install ,, no issues

  2. #2
    Senior Tech 250+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    308
    Rep Power
    28

    Re: BH c346e "failure to complete print job"

    Error code, please.
    Sounds like a driver issue, some PC may have 'Spool first then print' settings or like.
    Why removed HDD?
    Never argue with an idiot. They will drag you down to their level and beat you with experience.

  3. #3
    Service Manager 1,000+ Posts
    BH c346e "failure to complete print job"


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    1,377
    Rep Power
    47

    Re: BH c346e "failure to complete print job"

    I think you meant "C364e". Are you saying the HDD is always uninstalled or you did it temporary just for troubleshooting purposes? Not sure about printing but thought the HDD had to be installed for at least scanning to work. Did you try formatting the HDD?

  4. #4
    RTFM!! 2,500+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    2,934
    Rep Power
    59

    Re: BH c346e "failure to complete print job"

    Do you get any error codes in the history?
    Like FA14 and C301.
    Have you tried firmware?
    Have you tried changing network speed setting?
    Replaced the HDD with another?
    Does it work ok connected directly to a laptop?
    Using authentication?
    Whatever

  5. #5
    Field Supervisor 500+ Posts Woxner's Avatar
    Join Date
    Jul 2011
    Location
    Felixstowe England
    Posts
    512
    Rep Power
    23

    Re: BH c346e "failure to complete print job"

    use the pcl driver if your going to use the ps dont use xps.

  6. #6
    Aging Tech 1,000+ Posts
    BH c346e "failure to complete print job"


    Join Date
    Jul 2013
    Location
    Desboro
    Posts
    1,806
    Rep Power
    44

    Re: BH c346e "failure to complete print job"

    Install the KonMin driver instead of the Windows generic driver

  7. #7
    Senior Tech 100+ Posts
    BH c346e "failure to complete print job"

    copyrooks's Avatar
    Join Date
    Oct 2013
    Posts
    107
    Rep Power
    12

    Re: BH c346e "failure to complete print job"

    Check the network speed setting make sure its not on something weird like half duplex

  8. #8
    Field Supervisor 500+ Posts digicor's Avatar
    Join Date
    Jul 2008
    Location
    tampa Florida
    Posts
    760
    Rep Power
    29

    Re: BH c346e "failure to complete print job"

    I was getting code fa14, i tried everything, so i uninstalled the hdd, the machine would print one or two then lock up, so i took the hdd out, it scans to email and copys fine, but now the print issue, i will try using the KM drivers and not the generic windows drivers,
    and check the network speed, thanks for all the input

  9. #9
    RTFM!! 2,500+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    2,934
    Rep Power
    59

    Re: BH c346e "failure to complete print job"

    Could be as simple as firmware.
    The KM XPS driver is crap use the PCL drivers only.
    Except for missing options the windows driver works fine.

    Did you give that HDD a format? But the machine should print fine without the HDD.
    Whatever

  10. #10
    Aging Tech 1,000+ Posts
    BH c346e "failure to complete print job"


    Join Date
    Jul 2013
    Location
    Desboro
    Posts
    1,806
    Rep Power
    44

    Re: BH c346e "failure to complete print job"

    Disconnect the network cable and ping the IP address. Maybe there are two devices with the same IP

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •