Bizhub C554e gone bad.....

**Zesti** · 12-20-2018

Originally Posted by Rylac

after you tried replacing the RAM, have you reinstalling the original RAM back into the machine to make sure there wasn't some sort of issue with the replacement RAM?

The original RAMS are working fine in my older Dell D630, in fact it got turbo with 4gb, it had 2gb...So RAMS are fine...

**Zesti** · 12-20-2018

Originally Posted by allan

Start the machine in diagnostic mode refer to self-diagnostic from power on in manual for the procedure.
It test communication between MFPB and other boards.
Helps if the box does not boot up.

Excellent lead, will try today...

**Zesti** · 02-15-2019

Ok guys, got this machine to alive again..

Just to recall the machine got bad after routine cleaning no maor task, after that the machine went to to stuck on 2 fins at startup and gave a heck

to me.
It got fixed by bellow method: I was suspected of bad SSDB but thanks God it was fine.
Install G20-A9 FW. and all was fine. Then updated the SSDB FW and all relative FW's.
So what went wrong was that there was power spikes, one of our power outlet was malfunctioning.
The FW got corrupted and all was wrong in haste.
I was trying to recover SSD while the base FW was corrupt and I was trying later version than uploaded.
Thanks for all you guys who cared for guidance.