Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: C284e dead

  1. #1
    Service Manager 1,000+ Posts
    C284e dead

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    C284e dead

    Just got this machine in for a client and it’s dead. First two Pillars show up on the screen and that’s it. Unplugged all accessory modules and still the same. Any ideas?

  2. #2
    Senior Tech 250+ Posts
    Join Date
    Dec 2015
    Location
    Pooler, GA
    Posts
    290
    Rep Power
    22

    Re: C284e dead

    NVRAM.

  3. #3
    Service Manager 1,000+ Posts
    C284e dead

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    Re: C284e dead

    Will firmware fix this?

    Quote Originally Posted by mincopier View Post
    NVRAM.

  4. #4
    Aging Tech 10,000+ Posts
    C284e dead

    copier addict's Avatar
    Join Date
    Jul 2013
    Location
    Diamond
    Posts
    11,916
    Rep Power
    322

    Re: C284e dead

    Quote Originally Posted by mrfuser View Post
    Will firmware fix this?
    If it is the SSD causing the problem there is specific firmware. Although it may not help if it is not booting.

  5. #5
    Service Manager 1,000+ Posts
    C284e dead

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    Re: C284e dead

    I tried unplugging the hard drive also and it still won’t boot

  6. #6
    Service Manager 1,000+ Posts
    C284e dead

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    Re: C284e dead

    Noticed cpu fan isn’t even coming on and there are 4 (I think) red leds lit up on the mfp board if that means anything.

  7. #7
    Service Manager 1,000+ Posts
    C284e dead

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    Re: C284e dead

    Well I download the firmware and tried to upgrade . Even though the screen did nothing the machine rebooted itself and came up to ready State ! Go figure that one out !?!?!?

    Only problem now is it won’t recognize drawer one

  8. #8
    Field Supervisor 500+ Posts Woxner's Avatar
    Join Date
    Jul 2011
    Location
    Felixstowe England
    Posts
    780
    Rep Power
    41

    Re: C284e dead

    go into service and under part isolation turn the tray back on

  9. #9
    Service Manager 1,000+ Posts
    C284e dead

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    Re: C284e dead

    Sorry I mis wrote. It sees the drawer only shows “????” On it and when you touch that drawer it says to reload paper. I checked paper lift and that is working so not sure why it doesn’t recognize size nor amount of paper loaded. Hmmm

  10. #10
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,387
    Rep Power
    152

    Re: C284e dead

    ??? means it is between sizes. Remove the tray and check the slides on the tray and the sensors at the back inside the machine.
    Set both trays the same and compare the sensor checks.
    Whatever

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here