Results 1 to 6 of 6
  1. #1
    Service Manager 1,000+ Posts
    C284e mfp and ssd boards

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,230
    Rep Power
    0

    C284e mfp and ssd boards

    I have a Machine thatís acting very strange . Does anyone know if I can take a in MFP board and the SSD board off of A c224and put it on A c284?

  2. #2
    RTFM!! 2,500+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    3,186
    Rep Power
    63

    Re: C284e mfp and ssd boards

    Yes its possible but tricky and you can loose your machine and that's not on me...
    Change out the MFPB only and use the existing SSD from your problem machine, start it with firmware and be sure to do the correct model selection.
    If that does not work put the old board back and start with firmware and model selection.

    Did warn you. Don't change the MFPB and the SSD at the same time!
    Ever used the reset boot utility?
    Whatever

  3. #3
    Service Manager 1,000+ Posts
    C284e mfp and ssd boards

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    2,020
    Rep Power
    48

    Re: C284e mfp and ssd boards

    What issues ..are you experiencing on your machine?

    Sent from portable device using fast cheapset!
    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

  4. #4
    Senior Tech 250+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    443
    Rep Power
    32

    Re: C284e mfp and ssd boards

    There's specific procedure how to fit used MFP board for a test purpose.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

  5. #5
    Service Manager 1,000+ Posts
    C284e mfp and ssd boards

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,230
    Rep Power
    0

    Re: C284e mfp and ssd boards

    Two bars and dead. Tried mfp repair tool and it says it completed and wonít do the two reboots. I can upgrade firmware but it always gives ng on mfp firmware.

  6. #6
    Service Manager 1,000+ Posts
    C284e mfp and ssd boards


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    1,504
    Rep Power
    51

    Re: C284e mfp and ssd boards

    try powering up machine with USB service port cover open but NO USB stick inserted. there is a sensor for that usb cover and for some reason I have been able to get machine to ready state by leaving cover open while powering on. This allowed me to get into service mode to format hdd, etc.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •