Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20
  1. #11
    Master Of The Obvious 10,000+ Posts
    Bizhub C452 doesn't p-rint after Fusing repair,data light blinking,no Demo p-rint

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: Bizhub C452 doesn't p-rint after Fusing repair,data light blinking,no Demo p-rint

    Can you print internal pages? If yes, can you print via crossover from your laptop, off the customers network. You can't know how many times I've gone out and found a dupe (duplicate IP address) that the local IT insisted did not exist. In one case I had the offending cellphone shut off to demonstrate the dupe. Local IT does not much like looking like an idiot on a very simple dupe. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  2. #12

  3. #13
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,103
    Rep Power
    346

    Re: Bizhub C452 doesn't p-rint after Fusing repair,data light blinking,no Demo p-rint

    1. Try reconnecting HDD
    2.Go in Service mode-State confirmation-HDD R/W check to check HDD
    3.Next you can try do logical format of HDD, you will need Movie data(animation).
    4.If nothing helps yo may need new HDD

    Good luck
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  4. #14
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,387
    Rep Power
    152

    Re: Bizhub C452 doesn't p-rint after Fusing repair,data light blinking,no Demo p-rint

    Or just disable the HDD. Don't need that for light printing.
    Whatever

  5. #15
    Senior Tech 250+ Posts mjunkaged's Avatar
    Join Date
    Feb 2009
    Location
    Seattle, WA
    Posts
    366
    Rep Power
    35

    Re: Bizhub C452 doesn't p-rint after Fusing repair,data light blinking,no Demo p-rint

    Try to print a settings list from service mode!! If machine hangs, it's a firmware or OACB problem. Stop focusing on printing or HDD and focus on the machine ONLY. Can it print a settings list page? Can it make a freakin' copy????

    Does it make any noise at all, like motors when you try to invoke a print operation??

  6. #16
    Senior Tech 100+ Posts
    Bizhub C452 doesn't p-rint after Fusing repair,data light blinking,no Demo p-rint


    Join Date
    Nov 2008
    Posts
    207
    Rep Power
    34

    Re: Bizhub C452 doesn't p-rint after Fusing repair,data light blinking,no Demo p-rint

    Quote Originally Posted by parsmehregan View Post
    Hi,
    Bizhub C452 after fusing repair doesn't print even Demo or configuration page. After sending print command from Network PC, Data light just blinking and after that it's not possible to cancel or check Job details for deleting.In fact there is any job in Job history. it has to be switched off and on again for checking utility or other menu. checking other post in this regard, following jobs are done:

    1-check from panel that user authentication/account track is off.
    2-The same from driver properties,configuration tab and both user/account authentication is off.
    3-Initialize from service mode and clear all data(not errors).
    4-there is no ip conflict and drivers are reinstalled.
    5-Network setting reset
    and there is no error code!
    I just tried to format the HDD but from Admin panel->Security the HDD setting is missed out!

    I know this occurred for many Techs but I didn't find any clear reason & solution.
    Any idea and recommendation would be great.

    Try just unplugging the network cable and them turning the machine on and then try internal prints it will at least rule out your network.

  7. #17
    Trusted Tech 50+ Posts Terna247's Avatar
    Join Date
    Jan 2019
    Location
    Makurdi, Benue
    Posts
    64
    Rep Power
    11

    Re: Bizhub C452 doesn't p-rint after Fusing repair,data light blinking,no Demo p-rint

    'I just tried to format the HDD but from Admin panel->Security the HDD setting is missed out!'

    Pluck out the NVram
    Put on the machine
    It will display a message about serial number
    Put it off again, hang back the ram and on again
    Best of luck.

  8. #18
    Senior Tech 250+ Posts mjunkaged's Avatar
    Join Date
    Feb 2009
    Location
    Seattle, WA
    Posts
    366
    Rep Power
    35

    Re: Bizhub C452 doesn't p-rint after Fusing repair,data light blinking,no Demo p-rint

    I agree with Allan, UNSET the HDD, do not remove NVRAM unless you want your (mostly working) copier to NOT work at all. OR have more problems to deal with!
    Service mode, trouble isolation. GOOD LUCK!

  9. #19
    Senior Tech 250+ Posts mjunkaged's Avatar
    Join Date
    Feb 2009
    Location
    Seattle, WA
    Posts
    366
    Rep Power
    35

    Re: Bizhub C452 doesn't p-rint after Fusing repair,data light blinking,no Demo p-rint

    Quote Originally Posted by mjunkaged View Post
    I agree with Allan, UNSET the HDD, do not remove NVRAM unless you want your (mostly working) copier to NOT work at all. OR have more problems to deal with!
    Service mode, trouble isolation. GOOD LUCK!

    ........Or was that 'set' to turn it off? I think default is unset? It's been a LOOOOOONNNNGG week for me copy-wise! Whichever one it's NOT when you look at it (HDD) under trouble isolation!

  10. #20
    Senior Tech 100+ Posts
    Join Date
    Feb 2017
    Posts
    115
    Rep Power
    16

    Re: Bizhub C452 doesn't p-rint after Fusing repair,data light blinking,no Demo p-rint

    if the hdd format from admin menu is missing that means the hdd is unset. do the format from service mode and also check if its installed in service mode

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here