Ok, machine was fine now suddenly can’t scan to email or fax. Print and copy are fine. Load original choose destination and hit start, screen changes then nothing happens and reverts back to screen where you choose destination! ?!?!?
any ideas?
Ok, machine was fine now suddenly can’t scan to email or fax. Print and copy are fine. Load original choose destination and hit start, screen changes then nothing happens and reverts back to screen where you choose destination! ?!?!?
any ideas?
Sorry have to ask, did you turn off and on "main" switch inside front door? I've seen this reset and start working.
Are you sure nothing changed like internet provider, modem, etc?
Also have seen settings get lost after power outage and have to be put back in.
Nothing changed. Copy works just fine. Print just fine. It won’t even try to scan a doc for fax or email
Sound like a SSD error. Check for errors in history an job log.
Try creating a new one-touch destination or send a fax by entering the number an see what that does.
If that works then try exporting clearing the machine and importing the destinations.
Whatever
Ssd check in service mode shows all good. Upgraded firmware without any problems. Swapped out the fax kit and all is still the same!
also can’t get the web interface to come up. Gets part way and stops
Last edited by mrfuser; 01-04-2019 at 08:38 PM.
Bizhubs use the HDD to scan & fax so may that has failed,?
However as always have you updated the firmware,?
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
His post says he updated firmware. I assume he did so with the desired fax kit installed.
I'm curious, is the button for scan or fax on the screen to select? DO you have any error messages or warning symbols on display? I'm not real familiar with 4 series color box. HDD is needed for both, as reply stated.
Some how the hdd uninstalled itself! No idea how but when it was reinstalled all worked!
Some how the hdd uninstalled itself! No idea how but when it was reinstalled all worked
You’re welcome
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks